Hastelloy C22 ASTM B574 Rod Supplier, Exporter, Manufacturer
Hastelloy C22 Rods, UNS N06022 Rods, ASTM B574 Hastelloy Alloy C22 Rods Supplier in India
Leoscor Alloys is a notable exporter, manufacturer and supplier of ASTM B574 Hastelloy C22 Rods in Mumbai India. Alloy 22 Rods should not be used in service temperatures above 1250° F due to the formation of detrimental phases which form above this temperature. Relatively referred as W. Nr. 2.4602 Rods, they are quite resistant to pitting, crevice corrosion and stress corrosion cracking. UNS N06022 Rods has outstanding resistance to both reducing and oxidizing media These alloys also has excellent resistance to oxidizing aqueous media, and has exceptional resistance to a wide variety of chemical process environments including strong oxidizers such as ferric acids, acetic anhydride, and seawater and brine solutions.
Hastelloy C22 Rods Polished, Bright & Hex Rods, DIN 2.4602, WNR 2.4602 & ASME SB574 Alloy C22 Rods Manufacturer in India
Leoscor Alloys exports Hastelloy C22 Rods to fabrication and process industries in Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, and Italy. Each order ships with mill test certificates and dimensional reports, so buyers can verify chemical composition and mechanical properties against ASTM B574 before the rod reaches the site.
Why Choose Hastelloy C22 Rod
Hastelloy C22 rods resist corrosion in the most aggressive process environments, including ferric chloride, wet chlorine gas, acetic anhydride and seawater. High chromium and molybdenum content blocks pitting, crevice corrosion and stress corrosion cracking, even under prolonged chloride exposure. With a tensile strength of 690 MPa and 45% elongation, the rod holds its structural integrity under sustained load and service temperatures up to 676°C.
In chemical processing, petrochemical, pharmaceutical, and pollution-control applications, these Hastelloy Rods protect vital components exposed to severe corrosive streams. Every rod meets ASTM B574 / ASME SB574 requirements and ships in round, square, hex, and flat sections from 5 mm to 500 mm in black, bright and polished finishes.
This combination of corrosion resistance and mechanical stability gives the Hastelloy C22 rod a dependable service life in equipment that cannot tolerate failure. Contact Leoscor Alloys, a Hastelloy C22 ASTM B574 Rod Supplier, for current stock and pricing.
Hastelloy Alloy C22 Rods Specification :
| Designation | : | ASTM B574 / ASME SB574 |
| Size | : | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Grades | : | Hastelloy C22 (UNS N06022) Round Rod 2.4602 |
| Length | : |
100 mm To 3000 mm Long & Above |
| Form | : |
Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh |
Hastelloy C22 Rods
Hastelloy UNS N06022 Rods
ASTM B574 C22 Hastelloy Rods Equivalent Grades
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C22 | N06022 | 2.4602 | - | NiCr21Mo14W | NW 6022 | - | - |
Hastelloy UNS N06022 Rods Chemical Composition
| Hastelloy C22 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr | W | V |
| Balance | 0.010 max | 12.5 – 14.5 | 0.50 max | 0.08 max | 2 – 6 | 0.02 max | 0.02 max | 2.5 max | 20 – 22.5 | 2.5 – 3.5 | 0.35 max |
Hastelloy Alloy WERKSTOFF NR. 2.4602 Rods Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 45000 , MPa – 310 | Psi – 1,00,000 , MPa – 690 | 45 % |
Price List of Hastelloy C22 Rods
Price of Hastelloy Rods ASTM B574 C22 : FOB Price: US $1-10 / Kilogram
Price of Hastelloy Alloy ASME SB574 C22 Rods : FOB Price: US $1-10 / Kilogram
Hastelloy Alloy C22 Rods Available Stock at Leoscor Alloys
We have Largest inventory of Hastelloy C22 Rods. Hastelloy C22 Rod Suppliers, ASTM B574 Hastelloy C22 Rods Exporter, Hastelloy Alloy C22 Threaded Rods, Hastelloy C22 Rods Dealer, Hastelloy C22 Black Rods Suppliers in Mumbai, India, Nickel Alloy C22 Rods, Alloy C22 Rods, Hastelloy UNS N06022 Rods Stockholder, Hastelloy C22 Square Rods Distributors, Hastelloy JIS NW 6022 Rods, Hastelloy DIN 2.4602 Rods, Hastelloy C22 Hex Rods, ASME SB574 Hastelloy C22 Rods Suppliers, UNS N06022 Rods, Hastelloy C22 Bright Rods Stockist, Alloy JIS NW 6022 Rods, Hastelloy WNR 2.4602 Rods, Hastelloy C22 Rods Suppliers, We are india's most trusted Manufacturer, Suppliers & Exporter of Hastelloy C22 Rods, Alloy C22 Rods are Available in Different Dimensions and Specifications in INDIA.
ASTM B574 C22 Hastelloy Alloy Rods Application Industry
Gas Processing Industries
Petrochemical Industries
Power Generation Industries
Food Processing Industries
Chemical Industries
Oil & Gas Industries
Fertilizers Industries
Sugar Industries
Frequently Asked Questions
Hastelloy C22 Rod is a nickel-chromium-molybdenum alloy rod (UNS N06022) that resists both oxidizing and reducing corrosive media. Chromium at 20 to 22.5%, molybdenum at 12.5 to 14.5%, and tungsten at 2.5 to 3.5% combine to block pitting, crevice attack and stress corrosion cracking in chloride-rich environments.
Leoscor Alloys manufactures Hastelloy C22 Rods to ASTM B574 and ASME SB574, the governing specifications for wrought nickel alloy rod and bar.
UNS N06022 identifies Hastelloy C22 Rod. The equivalent designations include Werkstoff Nr. 2.4602, JIS NW 6022, and EN NiCr21Mo14W.
Sizes range from 5 mm to 500 mm, with diameters between 0.1 mm and 100 mm and lengths from 100 mm to 3000 mm and above. Leoscor Alloys supplies round, square, hex, flat, and rectangular sections within this range.
Chemical processing, petrochemical, pharmaceutical, and pollution-control industries use Hastelloy C22 Rods in components exposed to strong oxidizers such as ferric chloride and acetic anhydride. Gas processing and power generation plants also specify this grade for parts that contact seawater and brine solutions.
Round, square, hex, flat, rectangular and wire mesh forms are available, along with black, bright, and polished surface finishes. Threaded rod is also stocked for fastening applications.
Yes. Leoscor Alloys cuts rods to specific lengths, diameters, and finishes based on drawings or project requirements and supplies threaded and machined variants on request.